Centurion Nova spare 4 button remote rubber blue

Centurion Nova spare 4 button remote rubber blue

Parts
[tabby title="About" open="yes"] Replacement button for Centurion nova 4 button remote. This spare rubber button can easily be installed in your old remote to make it good as new. [tabby title="Manuals | Guides"] CENTURION NOVA Code-hopping Remote Control [tabby title="Accessories"] [tabbyending]  
Read More
CENTURION NOVA Code-hopping Remote Control

CENTURION NOVA Code-hopping Remote Control

Remotes / transmitters
[tabby title="About" open="yes"] Fixed-coded remote systems – particularly those using dipswitches to set the code, are very easy to copy or clone. They also offer a very limited number of possible codes. In other words, these systems only provide convenience, with very limited security. CENTURION’s solution? The award-winning NOVA remote controls offer code-hopping technology. Each code that is transmitted by the remote is totally and randomly different to the last code transmitted. This prevents unwanted copying of the remote signal and cloning of the remote itself. CENTURION NOVA remote controls offers the same level of security as currently provided by leading brand automobile manufacturers for immobilising vehicle alarms and activating door locks. MAIN FEATURES: Durable silicone buttons made to last and last Sleek and stylish carbon look. 433Mhz operating frequency.…
Read More
Dace Duraoptics beam

Dace Duraoptics beam

Passives and Beams
[tabby title="About" open="yes"] DuraOptics Safety Beams are used to prevent the accidental closure of the gate on a vehicle or person. It is recommended that beams are used for safety reasons at all times and in particular if the gate is set on Auto Close. DuraOptics are best suited up to 20m and thus are ideal for safety in gate automation. While some people may use them as Perimeter Intruder Beams it is not their intended use. [tabby title="Manuals | Guides"] Dace Duraoptics beam Install Manual [tabby title="Accessories"] [tabbyending]
Read More
CENTURION i5 Infrared Gate Safety Beams

CENTURION i5 Infrared Gate Safety Beams

Passives and Beams
[tabby title="About" open="yes"] i5 infrared beams from CENTURION are simple to align, extremely reliable and boasts an operating range of up to 40m. It can be used on gates, garage doors, and even for simple perimeter protection. MAIN FEATURES: Wide infrared beam makes for supremely easy beam alignment – no more battling onsite. Highly cost-effective detection solution. Easy commissioning thanks to LED indicators. 40 metre range – suitable for even the widest of entrances. Compatible with Intruder-detection Alarm functionality (a world first) – greatly improves security. Wide input voltage range. DESCRIPTION Power Supply 12 - 24V DC/AC Power Consumption Transmitter 21mA Receiver 43mA @ 12V Maximum Distance 40m Alignment Automatic - 9m² @ 10m (parallel - circular area) Output Contact Rating 5A @ 220V AC (non-inductive) Operating Temperature -15°C to…
Read More
Sentry 4 Zone alarm Panel (Standard)

Sentry 4 Zone alarm Panel (Standard)

Alarm Systems
[tabby title="About" open="yes"] The SENTRY 4 Zone alarm panel is a cost effective standalone security system, that can be used in any application that requires security. A GSM of Radio Transmitter can be connected for off-site monitoring. The SENTRY 4 Zone is a self-contained control unit with power, arm/disarm, bypass and zone led's on the front of the housing. The unit can be armed or disarmed using the on-board receiver (transmitter included) or and externally connected key switch. Bypassing of the zones are done on the remote. Up to 15 remotes can be programmed into the system. No configuring of the unit is required after installation, making it an easy installation. Typical Applications: - Small Houses - Containers & Storage Units - Caravans - Storage Room/Shed Technical Specifications Zones: 4 Power…
Read More
DTS512/624 MAGNETIC ACTUATOR

DTS512/624 MAGNETIC ACTUATOR

Parts
Limit switch actuator mounting instructions 1. Remove the screw attaching the nylon rack to the angle that is closest to the position of the reed switch on the motor when the gate is in the close and open position. 2. Fit limit switch actuators with screws provided onto the nylon rack. 3. Setting the gate close actuator – Close the gate with approximately 15-20mm gap between gate and close stopper. Now move the actuator until the close LED lights up. Fasten the actuator. 4. Setting the gate open actuator – Open the gate with approximately 15-20mm gap between gate and open stopper. Now move the actuator until the open LED lights up. Fasten the actuator. 5. The gate must never bump against the close or open end stoppers. Important: For…
Read More